Cold weather is coming, nothing better than soaking in a bottle of hot water. But a bottle of hot rubber water isn’t very good against it. You can wrap it in a pillowcase, but you can do much better than that. Here, we’ve compiled some crochet patterns and free tutorials for creating caps and caps to make them even more comfortable. It is a fast project. Also ideal for last minute gifts.

In cold weather, there’s nothing like cuddling with a hot bottle of hot water. Here is a set of patterns and tutorials to help you create covers and intimates for added convenience. These are mostly crochet and sewing but I also found some nice crochets. Fun!

Rubber Hot water Bottle Crochet Cover pattern

Measurements:
Approx 13″ x 8″ [33 cm x 20 cm]

Gauge:
Front : 18 sc and 22 rows = 4″ [10 cm].

Skill level: Beginner – Intermediate

Click For Free Pattern

Basic Hot Water Bottle Cover Pattern

There are many hot water bottle caps out there, but some are decorative rather than functional. If your lid is intact and you don’t risk burning your fingers, pricking the gaps in the crochet, and touching the open parts of the hot water bottle (especially children’s pinky fingers), this is the type of cover for you.

This model is pretty simple and a great starting point for designing and customizing your own hot water bottle caps. There is a guide on how to make a cap for the bottle that you have.
The basic stitches used in this pattern are chain, double crochet, half height, front posts half triple and back half triple (UK terms). The pattern does not include tutorials on how to create these stitches.

Click For Free Pattern

Hot Water Bobble Bottle Pattern

Yarn:
1 skein, or approximately 170-200m of any 8ply/DK weight yarn. We used Eva by Great Ocean Road Woollen Mill.

Needles:
Flat version – 4.00mm and 3.50mm straight needles
In the round – 4.00mm and 3.50mm 80cm circular needles

Gauge:
22 stitches and 30 rows to 10cm in Stocking Stitch

Click For Free Pattern

Hot Water Bottle Cover Color Pattern

Yarn:
1 skein, or approximately 170-200m of any 8ply/DK weight yarn . We used Wren & Ollie’s Spin DK.

Needles:
Flat version – 4mm and 3.50mm straight needles
In the round – 4mm and 3.50mm 80cm circular needles

Gauge:
22 stitches and 30 rows to 10cm in Stocking Stitch

Click For Free Pattern

Hot Water Bottle Cover Cable Knit Pattern

This is a quick and easy model for the hot water bottle cap. It is knitted in a round with a simple cord pattern on both sides. The pattern is designed for a standard size hot water bottle. However, tips are provided for customizing the pattern if your pattern is a different size.
Animal fibers like wool, alpaca, and cashmere are great choices when changing yarns as they are great insulators and help keep your hot water bottle warm longer.

Click For Free Pattern

Hot Water Bottle Cover

After seeing so many gorgeous hot water bottle caps and not finding great crochet patterns, this was created.

Warm, soft crochet covers for your fever make for a warm and comfortable bed!

This is a PDF template written in US terms. It is suitable for beginners who have crocheted before. The stitches are clearly marked with step-by-step photos that you will guide.

Click For Free Pattern

Stripy Hot Water Bottle Cover

Tie this gorgeous striped hot water bottle cap as a gift or for yourself, it’s nice to snuggle up on a cold night! Use the suggested colors in the pattern or attack your pelvis and use curiosities in the thread!

Hook – 3.5 mm

Yarn – DK weight

I used Stylecraft Special DK in the following colors: white, cloud blue, plum, pale rose, meadow, purple, storm blue, parma violet

Click For Free Pattern

Hot Water Heart Bottle Cover

From Monday to Sunday, this hot water bottle cap will give you the warmest hugs in winter.

Click For Free Pattern

Snowflake Hot Water Bottle Cover

This model is for hot water bottle cap. It is knitted seamlessly from bottom to top using the Magic Loop method, with half of the stitches being sewn on each of the two needles at the same time. It includes a gorgeous braided color range, ribbed foldable cuff and 3 buttons. Also included is a web link to a useful tutorial for a custom breakdown.

Materials:

Hobbycraft Women’s Institute Premium Acrylic Yarn
1 x 100 g ball (color A)
1 x 100 g ball (color B)
4 mm round needles
3 x 15mm buttons
Stitch holder or waste thread

Click For Free Pattern

Morwenna Hot Water Bottle Cover

A crochet pattern for the Morwenna hot water bottle cover – fits the standard hot water bottle size (33 x 20 cm).
Made from sports weight yarn (3 colors – 260 m primary color, 10 m secondary color each), 3.5 mm crochet hook and 3 x 17 mm buttons.
It was written using British crochet terminology.

Click For Free Pattern

Hot Water Bottle Cover Free Pattern

Pattern Hot Water Bottle Cover

•make a chain of 30 stitches

•make 87 rows of single crochet; the complete pattern is made of single crochet stitches

•start decreasing to make the top of the bottle a little curved: row 88 decreases 3 stitches by making no chain for the height of this row, crocheting together the first two stitches of the row, and two at the end. you now have 27 stitches

row 89: decrease the same way as row 88, you now have 24 stitches
row 90: decrease 3 stitches, you now have 21 stitches
row 91: decrease 3 stitches, you now have 18 stitches
row 92: decrease 3 stitches, you now have 15 stitches
row 93: decrease 3 stitches, you now have 12 stitches
row 94 + 95: 12 stitches of single crochet
row 96: increase by 2 stitches (increase by making 2 single crochet in one stitch), one at the beginning and one at the end. you now have 14 stitches
row 97: increase 2 stitches, you now have 16 stitches
row 98: increase 2 stitches, you now have 18 stitches ~ this should match the height and width of the top of the bottle
row 99-109: rows of 18 stitches to go around the top
row 110: decrease with 2 stitches, you now have 16 stitches
row 111: decrease with 2 stitches, you now have 14 stitches
row 112: decrease with 2 stitches, you now have 12 stitches
row 113 + 114: 12 stitches
row 115: increase 3 stitches, you now have 15 stitches
row 116: increase 3 stitches, you now have 18 stitches
row 117: increase 3 stitches, you now have 21 stitches
row 118: increase 3 stitches, you now have 24 stitches
row 119: increase 3 stitches, you now have 27 stitches
row 120: increase 3 stitches, you now have 30 stitches
row 121-138: 30 stitches of single crochet

If needed, sew in the velcro. Fit the cover around the bottle and if it is a good fit, start crocheting the sides together with single crochet stitches. The F on this cover was embroidered onto it after it was finished.

Kastelholm Hot Water Bottle Cover

Materials:

REGIA PREMIUM Silk, 100 g ball
about 400 m/100 g (3.5 oz ≈ 437 yds)
Col 00052 (baby blue) 1 ball
Work with the double yarn throughout!

Pattern History
This pattern was published first with former Design number 5548 in REGIA Silk Journal “Edle Seide spüren”

Click For Free Pattern

Hot Water Bottle Cozy Cover

Yarn DK Acrylic 100% (cotton-acrylic would work better, as it won’t stretch after wash) 50g black and 50g white.
Needles 3mm = US#2.5 circular and double pointed.

Click For Free Pattern

Cozy And Cuddly Hot Water Bottle Cover

A cozy and cute hot water bottle cap that’s thick enough to keep your toes warm even on the coldest winter nights. The Haworth looks a little antique, an old-fashioned touch. The finished comfort reminded me of reading the Brontë brothers’ classics – a must on a dark, snowy day – and so it was named after the quiet and charming village where they lived their lives.

The Haworth is one-piece, round, knitted bottom up. A button band on the back is operated with the help of a temporary cast and all comfort requires minimal finishing. The cable model is only provided in tabular form and the assembly instructions are fully written.

Click For Free Pattern

Housse Cerf-Moi-Fort Cover Pattern

You can find the free pattern on the blog via the link on Ravelry. A printable version can also be purchased. Many Thanks!!

Winter will be warm and comfortable with this knitted hot water bottle cap! BEAUTIFUL DEER AND DEER PATTERNS WITH TAPESTRY DUPLICATE STITCHES MAKE IT A NICE PROJECT TO KNIT!

Click For Free Pattern

Snowflake Hottie Water Bottle Pattern

You will also need:
Small amounts (4-8g) of 2 contrast colours.
3 Buttons (Rowan Product code:00318)

Click For Free Pattern

Knifty Hottie Water Bottle

Measurements:

To fit 2L hot water bottle
Width: 40 cm (16 inches)
Length: 38.5 cm (15.5 inches)

Materials:

Robin Jukebox Mega Chunky
Shade: Stones
Round Knifty-Knitter Loom with 40 pegs
Loom pick tool

Techniques used:

double e-wrap cast on
flat stitch
making up/finishing
slip-knot cast off

Click For Free Pattern

Please click next or prev button for PATTERNS